Avoiding EHR Performance Issues in the First Place

In my post about the common EHR implementation problem of EHR slowness, I mentioned that I’d follow up with a post on how you can avoid the EMR slowness issue altogether. It’s better to avoid than fix problems.

The best way to approach EHR performance issues is to make them part of your EHR selection process. EHR performance issues could and should be a deal breaker for you when you’re evaluating EHR companies. How then can you identify EHR software that might have these performance issues?

Red Flag #1 – EHR Demo Slowness – Bring a red pen to your demo and every time they say something like, “It’s not usually this slow?” or “It must be slow because it’s running on my laptop.” make a BIG RED mark on your paper (or tablet if you’re advanced like that). Even one red mark should be cause for concern and investigation.

Certainly there are situations where environmental issues can cause slowness to an EHR. So, you can’t completely rule them out completely for this, but this is their demo. This is there one time to shine. If they can’t get their EHR demo running at full speed, what makes you think an EHR production environment will be much better?

You can make an extra red mark if it’s a SaaS EHR that’s providing the demo. They might say it’s just “the internet connection.” Well, guess what? Soon, that’s going to be you using that EHR and often on similar internet connections.

Of course, the message to EHR vendors is to make sure your demo runs as fast as your production system.

Red Flag #2 – Site Visit Slowness – While the demo can tell you a lot about an EHR software, it can’t necessarily tell you the speed of the EHR software. Just because the EHR is fast during the EHR demo, doesn’t mean that same EHR software will be fast in a production environment. Add this to the multitude of reasons why a site visit to a current user of that EHR is so important.

Make sure to do that site visit at one comparable in size and users to your clinic. You don’t want to look at the EHR responsiveness of a solo practice if you’re going to be a 6 provider multi clinic setup. Size matters when it comes to EHR speed.

Once on site, you can get an idea of the speed and responsiveness of the EHR software in two ways. First, observe the users of the EHR in the clinic. See if they exhibit any of the systems listed in the first section of this post. Another observation is to see how quickly they’re clicking around the EHR. If you see a lot of clicks in a row with little waiting in between clicks, that’s a great thing. If you see them click, wait, click, wait, click, click , wait. Be afraid.

The second way is to ask the EHR users. The problem with doing this is that only one response has value. If they say the EHR is slow, then you’ve gleaned some important information that’s worth checking on. If they say the EHR is fast, then you don’t necessarily know. The problem is that you don’t know what the user considers fast. What’s their frame of reference for saying it’s fast? Do they know what fast is? Have they just been using the EHR software so long that they’ve hit a rhythm that makes it feel faster than it really is? It’s a good sign if they say that it’s fast, but take it with a grain of salt.

Red Flag #3 – Use A Demo EHR System Yourself – Most EHR vendors will provide you a way to demo the product yourself. This isn’t a fool proof method to test EHR slowness, but it’s another decent test of the EHR’s responsiveness. Try it out using your internet connection and your computer hardware. Nothing like first hand experience documenting some patient visits to learn about the speed of an EHR.

EHR Speed Suggestion – Don’t Skimp on Hardware
Far too often I see a clinic skimp on the hardware requirements and regret it later. In fact, they often end up spending the money twice since they have to buy new hardware since they skimped in the beginning.

Of course, this suggestion can be taken too far as well. The computer and laptop manufacturers will try to sell you the whole kitchen and you might only need the stove and refrigerator. To put it in more practical terms, you’re going to want plenty of RAM, but do you really need the webcam, Blu-ray player, and special 100 in 1 media device?

Just because an EHR vendor says their EHR software can work on a certain hardware configuration doesn’t mean it should be used on that hardware configuration. In the middle there’s a spot between can and overkill that’s called optimal. Find that hardware configuration and you’ll be a much happier EHR user.

Don’t accept an EHR that’s slow. Make sure that the EHR performs at a satisfactory level. I know of nothing that frustrates a clinic more than a slow EHR.

About the author

John Lynn

John Lynn

John Lynn is the Founder of HealthcareScene.com, a network of leading Healthcare IT resources. The flagship blog, Healthcare IT Today, contains over 13,000 articles with over half of the articles written by John. These EMR and Healthcare IT related articles have been viewed over 20 million times.

John manages Healthcare IT Central, the leading career Health IT job board. He also organizes the first of its kind conference and community focused on healthcare marketing, Healthcare and IT Marketing Conference, and a healthcare IT conference, EXPO.health, focused on practical healthcare IT innovation. John is an advisor to multiple healthcare IT companies. John is highly involved in social media, and in addition to his blogs can be found on Twitter: @techguy.